{}

0 item count of documents is

My Products Item count in basket is 0 My Documents Item count in basket is 0

Support
Search FAQs

Search FAQs

price list plc Citect Scada Web Client XAPD1501 test certificate m221 zcky41 474 9B1610A09318 How to set nlp

What is the thickness of the Steel sheet metal used in Okken switchboard.

The Steel sheet metal thickness used in Okken switchboard is as listed below: Okken Steel sheet metal thickness Housing Thickness mm Door 2.00mm Rear panels 1.50mm Side panels 1.50mm Roof 1.50mm...

Published on:4/27/2010Last Modified on:9/30/2021

What is the material composition of the Main Bus Bar of the Masterpact ACB?

The material composition used in the Main Bus Bar of the Masterpact Air Circuit breaker (ACB) is shown in the table attached. Note: AL/Sn5 means Aluminum connector with Sn5 coated

Published on:12/31/2009Last Modified on:8/9/2023

What is the accuracy of the Premium PLC CPU real time clock.

Real time clock accuracy: Accuracy of the real time clock is one second (%SW50) +/- 200ms. Resolution of the real time clock is one second (%SW50) +/- 200ms,because 200ms is the refresh rate of the...

Published on:12/31/2009Last Modified on:7/15/2022

What is the short circuit current rating for TeSys GV2G Comb Busbar.

The short-circuit current withstand rating (KA) of Tesys Comb Busbar is compatible with the breaking capacity of Motor Protection Circuit Breakers (MPCB) of GV series. The GV Series Comb Busbar does...

Published on:12/31/2009Last Modified on:9/30/2021

What is the difference between ModSoft PID function and Concept PID...

The difference between ModSoft PID and Concept PID loops are as follows: PID (ModSoft): PB - Gain = 100 / PB I - Integral Coefficient Expressed as Repeats/Minute. The higher the value, the greater...

Published on:12/31/2009Last Modified on:8/21/2023

What is the meaning of elapsed time and power on time in the fault history...

In fault history the elapsed time refers to [Run time] (rtH). This parameter provides the total duration of time, the motor has been switched on. Power on time refers to (PtH) and this parameter...

Published on:12/31/2009Last Modified on:8/4/2022

What is the DC Bus Voltage Threshold at which the Brake IGBT operates in...

The Altivar 71 Drive Braking IGBT operates when the value of DC Bus Voltage is higher than the DC Bus Threshold Voltage OBR. When the value of the DC Bus Voltage is lower than the threshold voltage...

Published on:12/31/2009Last Modified on:8/4/2022

What is the setup procedure to establish the communication of Altivar 21...

The procedure for communication setup of the Altivar 21 Drive via ModBus RTU or ModBus Network is as follows: 1. Pass the register address of Altivar 21 Drive to the PLC (ModBus Master). This enables...

Published on:12/31/2009Last Modified on:8/4/2022